Two wires of memory alloy are fixed on metal parts as shown above. In general, it is extremely difficult to insert decoration parts into this type of metal parts.
By making good use of the elasticity of silicone, it becomes easy to put on the decoration parts as if you were pulling on socks.By putting a silicone component in between 2 sheets of metal temples, the frame can look attractive with an interesting touch feeling of silicone.
When a thin metal sheet is used for the front of a frame, lens processing becomes more difficult because grooves have to be processed on the lens.
We recommend using SPR for protection of the lenses. SPR is very thin (0.5mm in diameter). However, it does not break even if it is pulled by a weight of approximately 400g.
We have two different sizes of SPR which are SPR27 (27mm in diameter) and SPR32 (32mm in diameter).Silicone is one of the best materials for nose pads because it is an anti-slip and non-allergic material.
Mush Pad which is made with an injection mold is safe, comfortable and very durable. It never breaks.
It is possible to make nose pads with an original design at a very reasonable mold cost.This silicon tube reduces pain behind the ear caused by all metal temples.